Heavy duty COMPLETE ironworker leather set. All you need

Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need
Heavy duty COMPLETE ironworker leather set. All you need

Heavy duty COMPLETE ironworker leather set. All you need
The items listed will be the only items included in this sale, and not the tools used for display purposes. 1-Hammer & sleever bar combo holder (8"x2 3/4"). 1-Double bullpin Holder (7"x4"). 1-3 ring spud wrench holder (12"x9"). 1-Leather Belt not sure how it is sized by clothing stores but from the tip of the buckle it measures 33" to the first hole and 60" to the last hole with double holes every inch for the two prong buckle. 2-Leather bolt bags (6"Wx8 1/2"Hx4Deep, roughly the same size as a klein canvas bolt bag). All measurements are approximate, and not to be considered without slight error.

All items are made with 10-12 oz latigo leather, which is extremely durable in the outside climate. All the stitching is done by hand. All the rivets are 3/16 zinc coated steel and they are backed by a steel washer to ensure the rivet wont pull through the leather if you get hung up climbing around.

The bullpin holder and sleever bar holder are of the adjustable lace up kind, where you have leather laces that you can tighten or loosen to the size of your tool and your preference, and I made sure to leave enough extra to allow for the loosening if needed. If you don't need the extra you can just cut off with razor knife if it bothers you. The snap hook for the hammer is stainless steel, as I have had trouble with the springs breaking way too often on brass snap hooks. The neck on the bullpin holder is tapered down to 2.5 inches where it hooks to your belt to have more room for placement, as sometimes with a harness its a pain to find room to put your leather.

The rings on the spud wrench holder are made of stainless steel welded O-rings and are oversized compared to most you will find on the market. They have an inside diameter of 2", which makes it alot easier to remove when you have tethers hooked to your wrenches, but will still hold a crescent sput or 3/4" spud easily without it falling through. The bolt bags are slightly tapered to where the top is smaller than the bottom to make it harder for things to fall out when you are climbing around on the iron. There is also an extra layer of leather at the top which serves two purposes.

It creates extra protection so the top of your bag doesnt get torn up from all the in and out. It also creates a small lip on the inside which keeps washers and nuts from falling out easily.

If you have any questions or concerns, or would like to have a custom order made, or just individual pieces instead of the whole set, please feel free to message me. The item "Heavy duty COMPLETE ironworker leather set. All you need" is in sale since Sunday, February 16, 2020. This item is in the category "Business & Industrial\Light Equipment & Tools\Hand Tools\Other Hand Tools".

The seller is "vizena2013" and is located in Lake Charles, Louisiana. This item can be shipped to United States.


Heavy duty COMPLETE ironworker leather set. All you need